Email tools
BIMI checker and record generator
Find out whether your logo can appear beside your emails in Gmail, Apple Mail and Yahoo, and build the BIMI record to publish. The test reads your BIMI record, checks your SVG logo and mark certificate, and checks the SPF, DKIM and DMARC records BIMI depends on.
- SVG Tiny PS logo test
- VMC and CMC certificates
- SPF, DKIM and DMARC
Free, no sign-up. Results are not saved.
This tool needs JavaScript. Turn JavaScript on and reload the page.
Email DNS
Your domain
The part after the @ in your email address, such as example.com. Subdomains and international names work too. The builders use it to write your records; nothing is sent until you press a Test button.
The service you read your email in. It decides your MX records and is usually your main sender.
Other services that send email as your domain
Tick every service that sends with an address at your domain: your website's SMTP plugin service, newsletters, your help desk. Each one needs its own SPF and DKIM setup, or its mail fails DMARC.
Enter your domain and run the full test: mail servers, SPF, DKIM for the services found, DMARC, MTA-STS, TLS reporting and BIMI in one go, as a checklist with a link to the tab that fixes each problem.
MX records say which servers receive email for your domain. Pick your mailbox provider to get the exact records, then test what is published.
MX records to publish
Choose where your mailboxes are above. Lower numbers are tried first.
How to add these records at your DNS host
- Which name to type. The Name column is relative to your domain: @ means the domain itself. Most DNS hosts add your domain for you, so type only the part shown (such as _dmarc). If a test then finds the record at _dmarc.example.com.example.com, your host did not add it and wants the full name instead.
- Cloudflare. MX and TXT records are always DNS only. Any host name an MX record points to must be DNS only too (grey cloud), because Cloudflare's proxy does not carry email. Set DKIM and autodiscover CNAME records to DNS only, and turn off CNAME flattening for them. Cloudflare's guide (opens in a new tab)
- Namecheap. Use @ for the domain itself and only the subdomain part for anything else, such as selector1._domainkey; do not add your domain to the Host field. Namecheap's guide (opens in a new tab)
- cPanel Zone Editor. cPanel adds your domain to the name automatically. An MX record's destination must be a full host name. cPanel manages SPF and DKIM for mail it sends under Email Deliverability. cPanel's guide (opens in a new tab)
- Long TXT values. A TXT string holds at most 255 characters. Most DNS hosts split longer values for you; if yours asks for quoted strings, use the zone-file version from Copy all, which is already split.
SPF lists every server allowed to send email as your domain. Tick every service that sends for you, including your website, and the builder writes one record and counts its DNS lookups.
Build your SPF record
Your mailbox provider and the services ticked above are included. A domain may have only one SPF record: put everything in this one.
With DMARC at quarantine or reject, ~all is safe and is what Google recommends: DMARC decides what happens to mail that fails. -all is stricter. Never use +all (anyone may send) or ?all (no opinion). The builder never adds ptr, which RFC 7208 says not to use.
Relays and alignment: why SPF can pass and DMARC still fail
DMARC needs SPF or DKIM to pass for your own domain. Most sending services use their own bounce address (the return path), so SPF passes for their domain, not yours. Their mail then passes DMARC only through DKIM signed with your domain, unless you set up the service's custom return path (bounce domain) on a subdomain of yours.
How to add these records at your DNS host
- Which name to type. The Name column is relative to your domain: @ means the domain itself. Most DNS hosts add your domain for you, so type only the part shown (such as _dmarc). If a test then finds the record at _dmarc.example.com.example.com, your host did not add it and wants the full name instead.
- Cloudflare. MX and TXT records are always DNS only. Any host name an MX record points to must be DNS only too (grey cloud), because Cloudflare's proxy does not carry email. Set DKIM and autodiscover CNAME records to DNS only, and turn off CNAME flattening for them. Cloudflare's guide (opens in a new tab)
- Namecheap. Use @ for the domain itself and only the subdomain part for anything else, such as selector1._domainkey; do not add your domain to the Host field. Namecheap's guide (opens in a new tab)
- cPanel Zone Editor. cPanel adds your domain to the name automatically. An MX record's destination must be a full host name. cPanel manages SPF and DKIM for mail it sends under Email Deliverability. cPanel's guide (opens in a new tab)
- Long TXT values. A TXT string holds at most 255 characters. Most DNS hosts split longer values for you; if yours asks for quoted strings, use the zone-file version from Copy all, which is already split.
DKIM signs each message with a key published in DNS. Pick the services that send for you to see the records each one needs, then test that the keys are there.
DKIM records for your services
Each service creates its own keys. Where it hands out CNAME records, it keeps and rotates the key for you, so copy the record exactly. Where the value depends on your account, copy it from the service. Ask for 2048-bit keys where the service offers a choice.
How to add these records at your DNS host
- Which name to type. The Name column is relative to your domain: @ means the domain itself. Most DNS hosts add your domain for you, so type only the part shown (such as _dmarc). If a test then finds the record at _dmarc.example.com.example.com, your host did not add it and wants the full name instead.
- Cloudflare. MX and TXT records are always DNS only. Any host name an MX record points to must be DNS only too (grey cloud), because Cloudflare's proxy does not carry email. Set DKIM and autodiscover CNAME records to DNS only, and turn off CNAME flattening for them. Cloudflare's guide (opens in a new tab)
- Namecheap. Use @ for the domain itself and only the subdomain part for anything else, such as selector1._domainkey; do not add your domain to the Host field. Namecheap's guide (opens in a new tab)
- cPanel Zone Editor. cPanel adds your domain to the name automatically. An MX record's destination must be a full host name. cPanel manages SPF and DKIM for mail it sends under Email Deliverability. cPanel's guide (opens in a new tab)
- Long TXT values. A TXT string holds at most 255 characters. Most DNS hosts split longer values for you; if yours asks for quoted strings, use the zone-file version from Copy all, which is already split.
DMARC tells receivers what to do with mail that fails SPF and DKIM, and where to send reports. Build a record, follow the rollout steps, and test it.
Build your DMARC record
Where you are heading: reject. Get there step by step (see the rollout guide below).
For subdomains that have no DMARC record of their own, such as news.yourdomain.
Made-up names like invoices.yourdomain are only used by forgers. np comes from RFC 9989 (May 2026); receivers that do not know it use sp.
One or more email addresses, separated by spaces: a mailbox you read, or a DMARC reporting service's address. The reports are XML files listing who sent as your domain.
Few receivers send these, and they can contain parts of real messages.
Only used with a failure report address.
Relaxed alignment accepts any subdomain of your domain, such as em1234.yourdomain used by a sending service. Strict needs the exact domain, which breaks most sending services' return paths; keep relaxed unless you have a reason.
Receivers apply one step less than your policy: none instead of quarantine, quarantine instead of reject. RFC 9989 (May 2026) added t=y and removed the old pct tag.
Rollout guide: from p=none to p=reject
- Start with p=none and a report address. Nothing changes for your mail, and receivers send you daily reports.
- Read the reports for two to four weeks. A DMARC reporting service makes them readable. List every service that sends as your domain, including your website's contact forms.
- Fix each sender. Set up DKIM with your domain for every service (the DKIM tab), and SPF where it aligns (the SPF tab), until real mail passes.
- Move to p=quarantine, with t=y for a week or two if you want a gentler step. Keep reading the reports.
- Move to p=reject. Forged mail is now refused, and your domain is ready for BIMI.
How to add these records at your DNS host
- Which name to type. The Name column is relative to your domain: @ means the domain itself. Most DNS hosts add your domain for you, so type only the part shown (such as _dmarc). If a test then finds the record at _dmarc.example.com.example.com, your host did not add it and wants the full name instead.
- Cloudflare. MX and TXT records are always DNS only. Any host name an MX record points to must be DNS only too (grey cloud), because Cloudflare's proxy does not carry email. Set DKIM and autodiscover CNAME records to DNS only, and turn off CNAME flattening for them. Cloudflare's guide (opens in a new tab)
- Namecheap. Use @ for the domain itself and only the subdomain part for anything else, such as selector1._domainkey; do not add your domain to the Host field. Namecheap's guide (opens in a new tab)
- cPanel Zone Editor. cPanel adds your domain to the name automatically. An MX record's destination must be a full host name. cPanel manages SPF and DKIM for mail it sends under Email Deliverability. cPanel's guide (opens in a new tab)
- Long TXT values. A TXT string holds at most 255 characters. Most DNS hosts split longer values for you; if yours asks for quoted strings, use the zone-file version from Copy all, which is already split.
MTA-STS makes other mail servers use an encrypted, verified connection when they deliver to you, and TLS reporting tells you when they cannot.
Build your MTA-STS policy
Switch to enforce once TLS reports show no failures.
max_age. Longer protects better between fetches; shorter lets changes reach senders sooner.
Filled in from your mailbox provider, or from your MX records after a test. *.example.com matches exactly one label, such as mx1.example.com.
Policy file
Where to host the policy
- Create the subdomain mta-sts.yourdomain and point it (A or CNAME record) at a web host that serves HTTPS. Any static host works.
- It needs its own valid certificate for mta-sts.yourdomain, such as a free Let's Encrypt certificate. A certificate only for www or the bare domain is not enough.
- Upload the file to .well-known/mta-sts.txt, served as text/plain with status 200 and no redirect: senders do not follow redirects.
- On WordPress hosting, a separate tiny site for mta-sts works best, so no plugin or HTTPS rule redirects it.
How to add these records at your DNS host
- Which name to type. The Name column is relative to your domain: @ means the domain itself. Most DNS hosts add your domain for you, so type only the part shown (such as _dmarc). If a test then finds the record at _dmarc.example.com.example.com, your host did not add it and wants the full name instead.
- Cloudflare. MX and TXT records are always DNS only. Any host name an MX record points to must be DNS only too (grey cloud), because Cloudflare's proxy does not carry email. Set DKIM and autodiscover CNAME records to DNS only, and turn off CNAME flattening for them. Cloudflare's guide (opens in a new tab)
- Namecheap. Use @ for the domain itself and only the subdomain part for anything else, such as selector1._domainkey; do not add your domain to the Host field. Namecheap's guide (opens in a new tab)
- cPanel Zone Editor. cPanel adds your domain to the name automatically. An MX record's destination must be a full host name. cPanel manages SPF and DKIM for mail it sends under Email Deliverability. cPanel's guide (opens in a new tab)
- Long TXT values. A TXT string holds at most 255 characters. Most DNS hosts split longer values for you; if yours asks for quoted strings, use the zone-file version from Copy all, which is already split.
BIMI shows your logo beside your emails in Gmail, Apple Mail and Yahoo once DMARC is enforced. Test your BIMI record, logo and certificate, and build the record.
BIMI record generator
Enter where your logo and certificate are hosted to get the TXT record to add to your DNS. A test fills these in from the record it finds.
- Name (host)
default._bimi- Type
TXT- Value
Enter your logo address to make the record.
Which inboxes show BIMI logos
- Gmail shows the logo only with a mark certificate: a Verified Mark Certificate (VMC) for a registered trademark, or a Common Mark Certificate (CMC) for a logo you have used for at least a year. It adds a verified checkmark for a VMC only.
- Apple Mail (iOS 16, macOS Ventura and later) documents a VMC as the evidence it checks.
- Yahoo says it does not require a certificate, and shows logos on bulk mail from senders with a good reputation.
- Every provider needs DMARC at p=quarantine or p=reject for all mail, a square SVG Tiny PS logo, and a BIMI record.
Read more: Google: set up BIMI (opens in a new tab), Yahoo: BIMI (opens in a new tab) and Apple: BIMI (opens in a new tab). Making a signature for your email? Try the email signature generator.
For a domain that sends and receives no email at all: four records that stop anyone sending convincing email as it.
Lock down a domain that sends no email
Spammers like domains with no email records, because nothing tells receivers to refuse forged mail from them. These records say: this domain sends nothing and receives nothing. Use them for parked domains, old brand domains, and subdomains that never send mail (publish them at the subdomain's own name).
Belt and braces: with SPF -all and DMARC p=reject, forged mail already fails. Some DNS hosts do not allow a wildcard here; leave it out if yours refuses it.
- MX 0 . is a null MX (RFC 7505): senders learn at once that the domain takes no mail, instead of retrying for days.
- v=spf1 -all says no server at all may send as the domain.
- p=reject asks receivers to refuse forged mail outright; sp=reject does the same for its subdomains, and strict alignment (adkim=s, aspf=s) leaves no room for lookalike subdomains.
How to add these records at your DNS host
- Which name to type. The Name column is relative to your domain: @ means the domain itself. Most DNS hosts add your domain for you, so type only the part shown (such as _dmarc). If a test then finds the record at _dmarc.example.com.example.com, your host did not add it and wants the full name instead.
- Cloudflare. MX and TXT records are always DNS only. Any host name an MX record points to must be DNS only too (grey cloud), because Cloudflare's proxy does not carry email. Set DKIM and autodiscover CNAME records to DNS only, and turn off CNAME flattening for them. Cloudflare's guide (opens in a new tab)
- Namecheap. Use @ for the domain itself and only the subdomain part for anything else, such as selector1._domainkey; do not add your domain to the Host field. Namecheap's guide (opens in a new tab)
- cPanel Zone Editor. cPanel adds your domain to the name automatically. An MX record's destination must be a full host name. cPanel manages SPF and DKIM for mail it sends under Email Deliverability. cPanel's guide (opens in a new tab)
- Long TXT values. A TXT string holds at most 255 characters. Most DNS hosts split longer values for you; if yours asks for quoted strings, use the zone-file version from Copy all, which is already split.
Not showing yet? Why new records take time, and how to clear caches
DNS answers are cached. Every record has a TTL (time to live), the number of seconds resolvers may keep it, often between 5 minutes and a day. A record that was missing when someone last looked is also cached as "missing", for as long as your zone's SOA record says. So a change shows at once in some places and later in others; DNS hosts commonly quote up to 48 hours for everything to catch up. The test above also asks your domain's own nameservers, so it can tell you when your DNS host already has the change.
- Clear the big public resolvers. Cloudflare: Purge 1.1.1.1 cache (opens in a new tab). Google: Flush Google Public DNS cache (opens in a new tab). Enter the full record name, such as _dmarc.example.com, and its type.
- Clear your browser's cache (Chrome). Copy this address into the address bar, then press Clear host cache:
chrome://net-internals/#dns - Clear your computer's cache. Windows (Command Prompt):
ipconfig /flushdnsmacOS (Terminal, asks for your password; Apple's documented command for OS X 10.10.4 and later):sudo killall -HUP mDNSResponderLinux with systemd-resolved:resolvectl flush-caches - Still stale? Your router and phone keep their own caches: restart them, or try from mobile data.
- Check the record is at the right name. If the test finds nothing, look in the DNS lookup tool for the record with your domain added twice (such as _dmarc.example.com.example.com): your DNS host added the domain for you.
What gets your email delivered in 2026
- Gmail and Yahoo ask every sender for SPF or DKIM. Bulk senders (for Gmail, about 5,000 or more messages a day to Gmail accounts) also need both SPF and DKIM, a DMARC record (p=none at least) aligned with SPF or DKIM, and one-click unsubscribe for marketing mail. Since November 2025 Gmail has been stepping up enforcement, including rejecting mail that does not comply.
- Outlook.com, Hotmail and Live ask domains that send more than 5,000 messages a day for passing SPF and DKIM and DMARC p=none or stronger, aligned with one of them. Since 5 May 2025 mail that fails goes to Junk.
- Mail from your WordPress site (password resets, orders, contact forms) counts too: send it through an SMTP plugin and an email service that is in your SPF and DKIM records.
Sources: Gmail sender guidelines (opens in a new tab), Yahoo sender best practices (opens in a new tab), Outlook.com requirements (opens in a new tab), RFC 7208 (SPF) (opens in a new tab), RFC 6376 (DKIM) (opens in a new tab), RFC 9989 (DMARC) (opens in a new tab), RFC 8461 (MTA-STS) (opens in a new tab) and RFC 7505 (null MX) (opens in a new tab). To see all of a domain's records, use the DNS lookup; to check its certificate, the SSL checker.
What you can do
-
Check the BIMI record, its logo and its mark certificate
-
Test the SVG logo against the SVG Tiny PS rules, with a preview
-
See whether DMARC is strict enough for BIMI
-
Count SPF DNS lookups through every include
-
Read DKIM keys and their size for your selectors
-
Generate the BIMI TXT record to add to your DNS
How to check BIMI and email authentication
-
Enter your domain
Enter the domain you send email from, such as example.com. To check DKIM too, pick your services or add your selectors: you find them as s= in the DKIM-Signature header of an email you sent.
-
Run the test
A quick Cloudflare security check runs first. The result appears in a few seconds, with a verdict on BIMI and every finding marked as passed, to improve, a problem or a note.
-
Fix the problems in order
Start with DMARC, then SPF and DKIM, then the BIMI record and logo. Each problem says how to fix it, and the BIMI record generator writes the TXT record for you.
What BIMI needs, and what this check tests
BIMI (Brand Indicators for Message Identification) lets inboxes show your logo beside emails from your domain. It is published as a TXT record at default._bimi.yourdomain, such as v=BIMI1; l=https://example.com/bimi/logo.svg; a=https://example.com/bimi/certificate.pem. BIMI is still an Internet-Draft, not an RFC, so each inbox sets its own rules.
DMARC comes first
A logo is only trusted once the domain proves its email is genuine, so every inbox asks for DMARC at p=quarantine or p=reject first, never p=none, and subdomains must not be set to none either. That means SPF and DKIM set up for every service that sends your mail, including your website's contact forms and WordPress emails. Send those through an SMTP plugin and an email service, not the web server.
The logo and the certificate
The logo must be a square SVG in the SVG Tiny PS profile, with a title and nothing that runs scripts or loads other files. Gmail recommends 32 KB or less. The check downloads it once from the address in your BIMI record and tests each rule.
- Gmail needs a mark certificate: a Verified Mark Certificate (VMC) for a registered trademark, or a Common Mark Certificate (CMC) for a logo you have used for at least a year. It shows a verified checkmark for a VMC only.
- Apple Mail documents a VMC as the evidence it checks.
- Yahoo says it does not require a certificate, and shows logos on bulk mail from senders with a good reputation.
The check reads the certificate and reports who it was issued to, when it expires and whether it covers your domain.
Know the limits
The check reads DNS and downloads two files; it sends no email, so it cannot prove your messages are signed and aligned. Send yourself a test email and look at its headers for that. The old BIMI check address, /bimi-check, now leads to this page. To see all of your DNS records, use the DNS lookup. Making a matching email signature? Try the email signature generator.
Frequently asked questions
Is the BIMI checker free?
Yes. There is no sign-up. Limits on how many tests one visitor can run keep the tool available for everyone.
Do I need a VMC to use BIMI?
For Gmail you need a mark certificate: a Verified Mark Certificate (VMC) if your logo is a registered trademark, or a Common Mark Certificate (CMC) if you have used it for at least a year. Apple documents a VMC. Yahoo says it does not require a certificate.
Why does my BIMI logo not show?
The usual reasons are a DMARC policy of p=none, a logo that is not SVG Tiny PS, a missing or expired certificate, or a domain that does not yet have the reputation the inbox asks for. Each inbox also decides for itself, and Gmail says a new logo can take up to 48 hours to appear. The check shows which requirement is not met.
Can I use DMARC test mode (t=y) with BIMI?
Play it safe and do not. With t=y, receivers apply one step less than your policy, so p=quarantine acts like p=none. BIMI needs a policy that is really enforced, so remove t=y before you publish a BIMI record.
How do I find my DKIM selector?
Open an email you sent, view its original source (in Gmail, Show original; in Outlook, View message source) and find the DKIM-Signature header. The selector is the value after s=. Google Workspace uses google by default, and Microsoft 365 uses selector1 and selector2.
Is BIMI worth it for a small business?
The DMARC work it needs is worth doing for any business, because it stops people sending email as you. The logo itself needs a certificate for Gmail and Apple Mail, which costs money each year, so weigh that against how much email you send to customers.
Is the domain I check stored?
The result is not saved. The MTA-STS policy, BIMI logo and certificate the test downloads are read once and not kept. To count how the tool is used, this site keeps the domain you tested for 12 months, with the time, the outcome, your approximate location (country, region and city), the site you came from and your type of device and browser, but no IP address, and never the services or DKIM selectors you picked. The privacy policy has the details.
Related tools
-
Look up DNS records and check SPF, DMARC, DKIM and DNSSEC.
-
Email header decoder
New (added recently)Paste an email’s full headers to see its delivery path, delays, SPF, DKIM, DMARC and ARC results, alignment and spam scores, decoded in your browser.
-
Blacklist checker
New (added recently)Check whether an IP address or a domain’s website and mail servers are on spam blocklists, with what each listing means and how to get removed.
-
DNS propagation checker
New (added recently)Check whether a DNS change has reached Google, Cloudflare, Quad9 and other public resolvers, and when each one refreshes.